Laser Tube Engraver

CW-3000DG Industrial Water Chiller for 60W / 80W CO2 Laser Tube CNC Engraving

CW-3000DG Industrial Water Chiller for 60W / 80W CO2 Laser Tube CNC Engraving
CW-3000DG Industrial Water Chiller for 60W / 80W CO2 Laser Tube CNC Engraving
CW-3000DG Industrial Water Chiller for 60W / 80W CO2 Laser Tube CNC Engraving
CW-3000DG Industrial Water Chiller for 60W / 80W CO2 Laser Tube CNC Engraving
CW-3000DG Industrial Water Chiller for 60W / 80W CO2 Laser Tube CNC Engraving
CW-3000DG Industrial Water Chiller for 60W / 80W CO2 Laser Tube CNC Engraving

CW-3000DG Industrial Water Chiller for 60W / 80W CO2 Laser Tube CNC Engraving

CW-3000DG Thermolysis Industrial Water Chiller (AC110V 60Hz) for. Laser EngraS&A Cutter with 60W / 80W CO2 Glass Laser Tube.

With design patent Certificate, CE and RoHS Certificate; This. CW3000 water chillers are equipped high speed fans inside, NOT able to control the water temperature.

Please confirm before place an order. Comprehensive reference to the international radiator - type cooling system. With completed water flow and over high temperature alarm functions.

Professional forced air - cooled radiator. Equipped with alarm output port.

Multiple power specifications; CE approval; RoHS approval. Is suitable for small water cooling device.

Provide stable working conditions for laser devices. Water can be used for a long time.

High heat dissipating capacity and not easy to be blocked. Alarm output port can quickly protect sensitive components.

It is designed for cooling the one CO2 glass laser tube under 80W of the. Its emitting rate is lower than 60%, you can choose CW5000 Water Chiller if you want the emitting rate higher than 60 %. Specific disconnection alarm securing protection. High cost performance, low failure rate. Cool Capacity is 50W /?

Forces circulation, 9L cooling tank capacity. It can extend the using life of laser tube and ensure the engraving effect better. 0.9A (AC100 - 120V). Radiator that forces the wind cooling. Alarm Function's Description The cooling water circulation loop alarm causes and the work of the state table.

Maintenance Cooling machine used in long term, you should open the machine and clean the dust in order to ensure. You can use non - corrosive antifreeze if you are in the northern cold regions. Our water cooling machine has S & A logo on the top of injection port. Fake cooler without the logo. Our water chiller has function of Intelligent temperature control.

Fake cooler without this function. This image is only to show the brand, specific parameters will vary depending on the model, please refer to the specifications table parameters prevail.

Our water chiller has S & A logo on the outfall. Fake cooler without this logo. Industrial cooling machine's installation is very simple, the new machine for the first time using, you can install it as following steps. Open the package and check the machine and all accessories. Open the mouth screw on the top of machine, add cooling water (Please don't power the machine without water).

Connect the inlet and outlet hose between water cooler and. Connect the power cable, turn the power switch (Note: Don't let the water overflow). Check the radiator water level again (Keep the distance between water level and mouth is 80 - 150mm).

Caution A cooler water condition in the absence of electricity is prohibited! Location placed cooler should select a well - ventilated, dry environment, away from other heat sources. Outlet of the back of the cooler should be away from obstruction for more than 30cm, both sides of the inlet should be away from obstructions for more than 10cm. Cooling machine no use for long time or in transport must keep emptying the cooling water. To protect the laser tube, cooling fan will suspend the work when the water temperature is low about 10?

, and it will continue to work when the water temperature rose to higher about 20? There is total one carton box. 470mm x 270mm x 370mm (18.5" x 10.6" x 14.6). 590mm x 400mm x 490mm (23" x 15.8" x 19.3).

The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction, children supervised not to play with the appliance! Caution: The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction, children supervised not to play with the appliance! Comprehensive guarantee for 2 years except the wearing parts. English user manual for machine using and maintaining. S&H will be determined based upon your address.

If you have any problems or concerns to your order or products, please message us and give us a chance to assist before you leave any feedback. We believe that we can produce a positive outcome to any situation to earn your likes. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Water Baths, Circulators & Chillers". The seller is "optim-tec" and is located in this country: CN. This item can be shipped worldwide.

  • Gross Weight: 12kg
  • Cooling: Radiator that forces the wind cooling
  • Amount of Cooling: 50W / ℃
  • Machine Weight: 9.5kg
  • Inlet and Outlet: 10mm brass connect
  • Bundle Description: 1 set CW-3000DG Industrial Water Chiller+ all necessary accessories
  • Custom Bundle: Yes
  • Product: Water Chiller
  • Power Supply: AC100 - 120V, 60Hz
  • Brand: Unbranded
  • Tank Capacity: 9L
  • Way of Circulation: Water pump forces circulation
  • Machine Dimension: 470mm x 270mm x 370mm (18.5\
  • Model: CW-3000DG
  • Packing Size: 590mm x 400mm x 490mm (23\
  • Package: Carton box
  • SKU: SU-061
  • Maximum Flow: 9L / min
  • Protection: Flow alarm
  • Current: 0.9A (AC100 - 120V)
  • Maximum Pumping Lift: 10m


CW-3000DG Industrial Water Chiller for 60W / 80W CO2 Laser Tube CNC Engraving