Brand New 60W CO2 Laser Engraving Machine Laser Tube. Power output(W):60 Wavelength:10600nm Length(mm):about 1250 Cooling System: Water Cooling. Triggering voltage(KV):22 Operating voltage(KV):16 Operating current(mA):0-20 Outer diameter(mm):55 Power stability: ±5% Water Cool Package including: 1x 60W laser tube. You can't leave cooling water in laser tube after power off, it will freeze at Cold areas. Optimum working water temperature is 15-35 degrees.Low power can extend the life of the tube. Installation Requirement Make sure to follow the operation instruction of model as shown in the illustration. The dedicated power should be equipped. The positive pole of laser tube is in high voltage (the ignition voltage is 22kv). It may cause the following consequence when it is failed to follow the instruction: Arcing the inner tube will be punctured by electricity and may cause water leakage. Can be used for 60W. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Please contact with us at first for more details. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. ECheck Issues: Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "ascprinting" and is located in this country: CA. This item can be shipped to Canada.