Confirm your machine's installation space. Like the diameter and length, all should be a little bigger than laser tube's size. (Due to different measuring tools and methods, there will be slight errors in length and diameter). CO2 laser tube adopt inner discharge tube coated with nanogold catalyst technology, power is 10% improved, and service life is 20% longer than ordinary laser tube, better chooice for the people who has heavy workload and long working hours. Single mode output mode, fine spot, strong penetrating power, no change in long-term use spot mode.
With excellent sealed-off technology to divide air and prevent inside gas diffusion, the laser tube will be more stable and efficient. CO2 laser tube is mainly used for laser marking machine, laser engraving machine, laser cutting machine, is the core component light, and can be carved and cut acrylic, cloth, leather, bamboo, wood, engraving, etc.80W (actual power 80-110W, peak power is 120W). 26mA (normally controlled at 22mA-24mA). Coating technology, double metal head design, and TEMOO beam model, makes the laser tubes have longer service life and more stable performance. Material:Hard glass+metal flange head. Hard glass part; the part formed by firing into the discharge tube GG17 material, water-cooled jacket, storage units and back to the trachea and components. This is mainly made of hard glass, the cavity, the electrode composed of three parts. Sealed-off CO2 laser is typically three pipe structure. Innermost discharge tube, the middle is the net water jacket, the outermost layer is the gas storage units, return pipe is used for communicating and gas discharge tubes. Please check whether the water circulation cycle is normal and no bubbles before each usage. Water temperature should be controlled at 25?
Change water every 2 weeks in Summer (Water temperature should not exceed 30 degrees in summer, can put ice in the water to cool down); Change water every 1 month in Winter (be careful not to let the water freeze in winter); When the machine power is high, need to keep the water clean. Please be careful to avoid dust accumulation near the high voltage electrode, keep it dry, and keep the high voltage end away from the metal as much as possible to avoid damage to the main board caused by high voltage discharge.
The laser tube is a glass product which is fragile. Avoid local stress when installing and using. Please make sure the address is correct when ordering. If you are satisfied with our products and service, Please. We will make our efforts to help you.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "eroslin" and is located in this country: CN. This item can be shipped worldwide.