Laser Tube Engraver

35W 700mm CO2 Laser Tube Glass Tube Cooling for Laser Engraver Cutting Machine

35W 700mm CO2 Laser Tube Glass Tube Cooling for Laser Engraver Cutting Machine
35W 700mm CO2 Laser Tube Glass Tube Cooling for Laser Engraver Cutting Machine
35W 700mm CO2 Laser Tube Glass Tube Cooling for Laser Engraver Cutting Machine
35W 700mm CO2 Laser Tube Glass Tube Cooling for Laser Engraver Cutting Machine
35W 700mm CO2 Laser Tube Glass Tube Cooling for Laser Engraver Cutting Machine
35W 700mm CO2 Laser Tube Glass Tube Cooling for Laser Engraver Cutting Machine
35W 700mm CO2 Laser Tube Glass Tube Cooling for Laser Engraver Cutting Machine

35W 700mm CO2 Laser Tube Glass Tube Cooling for Laser Engraver Cutting Machine
35W 700mm CO2 Laser Tube, Cooling for the Laser Engraver. Its maximum power can reach 35W. Maximum 2, 000 Hours Life Span. 1.85" x 27.5" L? Good mode, high power and cost effective. Suitable Machines Model Most machines with 700mm length 35W laser tube. Using conditions of laser tube 1. Ambient temperature: 10 - 40°C; 2. Relative humidity: 45% - 85% Cooling conditions 1. Cooling water temperature: 15 - 30°C in summer, in other seasons 20°C is better. Cooling water flow rate: Above 6L / min; 3. Water quality: Drinking water and impurities is less than 0.2mm in diameter; 4. Cooling water PH value: 6 -9. Suitable for advertising industry and other high precision engraving and simple cutting applications. We will send a new one freely if the tube is broken during transit. Once received the laser tube, please check again the first time. We need the damaged record from the courier as the proof before we send the new one free. The laser engraving uses a beam of light as the engraving tool, so no part of the machinery actually touches the material being engraved. You don t need a special system to hold down your engraving material. The engraved words and graphs do not fade and can exist permanently and can avoid being forged effectively. How much power do I need? 25-35 Watts - It is special for stamp carving and simple engraving and thin material cutting, not recommended for thick cutting or dual head applications. 40-50 Watts - Medium production power level for deeper, high speed engraving and slightly thick cutting operations. 60-80 Watts - High production power level provides increased throughput, deep engraving and cutting.

Ideal for precision engraving and cutting. 100-180 Watts - Very high production power level that is ideal for heavy cutting and deep, higher throughput engraving. For example, if you want to cut acrylic of thickness of over 3mm (include 3mm); you can choose high power lasers. Wooden Box: There is total one wooden box. 1.85" / 3.1" x 49.2 L?

Single pack tube size: 35" x 6.3" x 6.3 (890mm x 160mm x 160mm). Single pack tube: 22lb (10kg). If by e-packet, 7-15 days to USA, and 2-4 weeks to other most countries. S&H will be determined based upon your address. We believe that we can produce a positive outcome to any situation to earn your likes.

This item is in the category "Business & Industrial\Office\Office Equipment\Laminating Equipment\Laminating Machines". The seller is "ing-print-supply" and is located in this country: CN. This item can be shipped worldwide.

  • SKU: SEC-031
  • Bundle Listing: Yes
  • Brand: Unbranded


35W 700mm CO2 Laser Tube Glass Tube Cooling for Laser Engraver Cutting Machine