Long Lifespan: catalyst coated discharge tube with processed electrode, the discharging is more stable, and working life is up to 10000 hours. Beam: stable cavity structure brings more reliable beam and better quality, beam mode is up to TEM00.
Solved the problem that beam mode changes, power is more stable. Production engineering and product structure is more mature. Product Upgrade: Product Details: Application: Applicable to all kinds of small and medium-sized non-metallic laser cutting machine, such as clothing, leather, textile, paper cutting, acrylic cutting and other materials.
Within the 360 day period, if the output power of the Co2 laser tube is lower than 80% of the rated power under standard operating conditions as set by the instruction booklet, we will take responsibility for the repair and replacement of the laser tube, free of charge. Our quality assurance does not apply to problems incurred under incorrect usage that do not comply with the instruction book. Incorrect operation of the Co2 laser tube may result in different consequences, including a change in color of the negative electrode after long term over-current use, and the service life will be significantly reduced.
Please cover the high pressure protective housing with plastic wrap to prevent dust from disturbing the interior electrodes. Cleaning Tips: Please do not use cotton swabs or other wipes to scrub the transmitting mirror on the Co2 laser tube. Doing so affects the output power. The specified cleaning method for the transmitting mirror is as follows 1. When the lens is stained, turn off the laser tube.
Use an air blower to blow away dust and dirt on the lens. Use a syringe to spray ethanol on the lens. After the ethanol evaporates, turn the laser tube back on. If the above methods do not work effectively, professionals are required, who will use a cotton swab dipped in ethanol to clean the lens in a rotating fashion away from the center, outwards to the edge.
The best method is to protect the windows from contamination. Do not use acetone to clean the glass. Do not move the two fastening screws on both ends of the laser tube, otherwise, the output power will decrease, and the laser tube will be scraped. When testing the light spot on organic glass, please keep the organic glass 300mm away from the transmitting mirror. Safety: As the C02 glass laser device generates invisible light, please wear eye protection gear when operating.A safety sign for high voltage is marked on the positive pole. Storage and Transportation Requirements: When storing and transporting the Co2 laser tube, please drain the cooling liquid and cover the tube ends with dustproof plastic bags. For storage, the required environmental temperature is 2-40CC and the humidity ranges from 10-60%. Adhesive tapes and sponges should be used to fix the laser tubes and prevent sliding during transport. A 70mm sponge should be use at the end of the transmitting mirror, and a 50mm sponge should be at the end of the fully reflecting mirror. Wooden Box: There is total one wooden box. 65" x 3.1" (1650 x 80mm).
80.71"x16.14"x20.08(2050x410x510mm). This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Other Healthcare, Lab & Dental". The seller is "bestchannels" and is located in this country: CN. This item can be shipped worldwide.